PFI Densified Fuel Grade: Premium
Mill Registration #16018
Grade Requirements:
Bulk Density: | 40-48 lbs/ft3 |
Diameter: | .230 – .285 in / 5.84-7.25 mm |
Durability: | > 96.5 |
Fines: | < 0.50% |
Ash Content (as received): | < 1% |
Length: | < 1% > 1.5 in. |
Moisture: | < 8.0% |
Chlorides: | < 300 ppm |
Manufacturers Guranteed Analysis:
Type of Material: | Hardwood |
Additives: | < 2% Vegetable Based Oil |
Minimum Heating Value (as received): | 7800 |
Other Manufacturers Guarantees: | < 0.7% Ash As Received |
13 Comments
Lot's of extra work Then give good heat.
Lots of extra work sifting anywhere from 1 to 2 cups of dust from each bag. Burns good after sifting sawdust out.
Lots of very long pellets that I’m good with.
Did you find this review helpful? Yes No
Very poor quality dusty broken pellets. I’ve had some bad pellets before but the se take win for poor quality. Normally can run 4-5 days without cleaning the pellet stove – can barely get a bag of these through it. Lots of klinkers
Did you find this review helpful? Yes No
Not Good
Having used a pellet stove for over thirty years I can say with confidence that these pellets contain none of the properties of a quality pellet fuel. I bought a ton, struggled my way through 10 bags, the rest will be put in the garden for mulch. If you want even average quality, look elsewhere. Nuff said.
Did you find this review helpful? Yes No