The 5510 King Pellet Stove with Ash Pan is manufactured by the oldest stove manufacturer in North America, with a proven track record of producing products that are made to last.
Heats up to 1,750 sq. ft.
Burns renewable fuel made of ground, dried wood, crop waste, waste paper and other organic materials compressed into pellets
Hopper size: 140 lb. (pellets)
Distribution and exhaust blower included
Dimensions: 26 in. W x 25 in. L x 34 in. H
5 year warranty
18 Comments
When my king 5510 gets to a certain temperature the room fan shuts off and won’t come back on till I turn it off and it cools down what would causing this and how can I fix it
i have a king pellet heater model 500 it wont kick on the room fan. Ive tried adjusting the side panal controls but with no luck. is there a site or a manual that tells me how to adjust the controls so the room fan will engage when the poper heat temp is reached
my king 5510 blower motor is making a loud noise?????
My stove us king 500 will not stay running. It has bad flame we have checked everything. Ran good for about a month which we bought it new and now it is always going out and displaying pllt u2.76 dflt I have no idea what this means? ?
Why does my king pellet stove fan on all the time won’t stop
if ur pellets are staring to over run ur burn pot turn down the auger speed press aux and heat fan at the same time it probably will be set to 1.75 turn it down till ur stove burn properly
I have a King 5510. It seems to work ok but if we run it more than on #1 heat setting. The pellets will eventually over-run the burn pot and it goes out and pellets everywhere inside stove. I don’t have a manual and have tried adjusting some of the controls. Where should heat and room fans be set in relation to each other. I don’t understand the draft fan as to what is a good setting? Also the Aux control what does that control?
Lastly what is the function of the Auger Delay button?
Thanks for your help.
my king pellet stove is going through two bags a day on the lowest setting. This seems like a bit much, to me. If I put it on a higher setting it buns 3 bags. I’m thinking i should of stayed with fuel oil. Is there anything i could do to improve the efficiency?